The Wheel Bench

Need Help?

Call Us +44 (0)1675 464 705

Mon - Thur: 8.30am - 5.00pm

Fridays: 8.30am - 3.00pm

Visit Our Show Garden

Our staff are there to guide you in making the perfect purchase.

arrow Click Here
Description

This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand-alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor

By mounting two pressure treated laminated timber circles opposite each other we have created a cylinder. An 800mm x 1200mm table was then fixed into the centre of the cylinder with two wooden seating sections either side. This leaves you with ample room for six people to be seated within. We have assembled this cylinder Wheel Bench using our signature parts of stainless steel, polycarbonate and timber.

Freedom to adapt

By placing two or more wheel bench’s inline and adding a roof between each unit, we can create a multitude of different sized seating areas. This would be ideal for bars, restaurants and picnic areas and would offer many different ways to use the Wheel Bench in any outdoor area.

Extend Your Outdoor Seating and Extend Your Outdoor Season

Minimum Space With Maximum Seating!!

This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor.

All the parts of the Wheel Bench are manufactured from materials ideally suited to the outdoors. For extra comfort we supply seat pads in 3 different colours, charcoal, green and burgundy.

Key Facts
  • Stainless steel roof to offer shade and reflect heat
  • Four laminated treated sustainable spruce timber arcs
  • Luxurious water resistant interior
  • Seating capacity for up to six guests
  • Fitted with removable table top
  • A foot print of no more than a standard garden patio set.
  • icon

    Water Resistant Interior

  • icon

    Seating For 6

  • icon

    Free Delivery & Installation

Ornate Garden The Wheel Bench
Measurements
  • Height: 218cm
  • Width:220cm
  • Depth: 135cm
  • Base are: 170cm x 135cm
Ornate Garden The Wheel Bench
Hardstanding

An area of 230cm x 145cm is required for the Wheel Bench to be installed. A hard base of no less than 175cm x 140cm is preferred to build your bench onto. The Wheel Bench should be installed onto an area of flat level ground.

Ground Preparation; If you are preparing new concrete or paving area for your Wheel Bench, we recommend on an overall depth of 30cm allowing 7 days for the ground to settle prior to the arrival of our fitting team.

Photo Gallery
Find a Stockist